Electronics testing - Passenger Car

Electronics testing - Passenger Car
Electronics testing - Passenger Car
Electronics testing - Passenger Car

In the vehicles more and more control units area active and supervise innumerable functions. To check and calibrate these systems in the vehicle final assembly particularly for this task some optimized measurement and diagnostic device are required.

With the introduction of the product generation x-tronic Dürr Assembly Products offers the following innovative inhouse-developments:

  • x-tronic balancer, a mobile measurement device to support and optimize the adjustment of the wheel geometry
  • Smart Ergo Level is a light, mobile measuring device for measuring of the steering wheel angle and the steering wheel inclination in vehicles in end of line wheel alignment machines
  • x-tronic carlink, a mobile ECU diagnostic interface

The x-tronic balancer is a combined system to measure the steering angle of vehicles (“steering wheel balance”) and to communicate with the vehicle control devices (ECUs).
With six function keys the balancer DI offer the additional possibility of user interaction (instruct, select, confirm). In this case, the test sequence is controlled by a host PC with x-line automation system.

The x-tronic balancer has been designed especially for the following applications:

  • Toe setting in the wheel alignment stand while taking the steering angle and the steering angle hysteresis into consideration
  • Calibration of ESP sensors, adaptive headlight range adjustment, level regulation, and much more
  • Performance of general electronics tests parallel to the wheel alignment

Smart Ergo Level is a mobile measuring device for measuring of the steering wheel angle and the steering wheel inclination in vehicles in end of line wheel alignment machines. The actual steering wheel angle and steering wheel inclination will be transmitted continuously to the x-line host PC. Furthermore, the device performs an evaluation of the measuring result and signalizes this by LEDs and an acoustical signaller. The measuring results will be transmitted wireless or by cable to the test stand PC.

Application:

  • Measuring device or auxiliary device for the toe angle adjustment of vehicles in the wheel alignment machine.
  • Measuring device or auxiliary device for the toe angle adjustment by considering the steering angle hysteresis.

The x-tronic carlink is a compact and robust ECU diagnostic device. It is able to communicate simultaneously with several ECUs on the same and/or different bus systems. A host PC using x-line automation system controls the test sequence.

In addition to this, the carlink D offers a possible operator interaction (instruct, select, confirm) with a display and six function keys.

The x-tronic carlink has been especially designed for the following applications:

  • Wireless ECU diagnosis in test stands and process stations
  • Parallel communication with several ECUs on up to 8 physical channels (CAN, K-Line, …)
  • Test tasks with operator interaction (carlink D)
  • Plug-in OBD2 diagnosis wire from Dürr

With the product generation x-tronic, Dürr Assembly Products offers a unique combination of hardware and software which has been developed especially for the case of application, while using standard operation systems and the automation system x-line.

Contact

Stefan V. Mueller

Stefan Müller

+49 (0) 68 98 / 6 92 - 5547
Stefan V. Mueller